Revision of gpio_shutdown.md

1 file changed, 13 insertions

gpio_shutdown.md(файл создан)

		@@ -0,0 +1,13 @@
1	+	Source: [https://github.com/CoolerMasterTechnology/Pi-Tool/issues/7#issuecomment-834979824](https://github.com/CoolerMasterTechnology/Pi-Tool/issues/7#issuecomment-834979824)
2	+
3	+	FWIW, if all you want is for the shutdown button to work, this application is completely unnecessary. The button is on the standard/default shutdown pin, GPIO 3, so all you have to do is add this to your /boot/config.txt:
4	+
5	+	# Enable shutdown button on GPIO 3
6	+	dtoverlay=gpio-shutdown
7	+
8	+	If you'd prefer to set the defaults explicitly:
9	+
10	+	# Enable shutdown button on GPIO 3
11	+	dtoverlay=gpio-shutdown,gpio_pin=3,active_low=1,gpio_pull=up,debounce=100
12	+
13	+	As a bonus, pressing the button while shut down will start the pi back up again. I think that works either way, but.

Новее Позже