Ревізії create.sh

Jarno Rankinen ревизій цього gist 1665466293. До ревизії

1 file changed, 2 insertions, 2 deletions

create.sh

			@@ -60,14 +60,14 @@ podman pod create -p 8081:80 --hostname "$NEXTCLOUD_HOSTNAME" --name nextcloud
60	60		## Mariadb
61	61		##
62	62		#
63		-	# podman build -f ./mariadb-nextcloud.Containerfile -t oranki.net/mariadb:latest
	63	+	# podman build -f ./mariadb-nextcloud.Containerfile -t localhost/mariadb:latest
64	64		# podman create --name nextcloud-db --pod nextcloud \
65	65		# -e MYSQL_ROOT_PASSWORD="$MYSQL_ROOT_PASSWD" \
66	66		# -e MYSQL_DATABASE='nextcloud' \
67	67		# -e MYSQL_USER='nextcloud' \
68	68		# -e MYSQL_PASSWORD="$MYSQL_PASSWD" \
69	69		# -v "$NEXTCLOUD_DB_DIR":/var/lib/mysql:Z \
70		-	# oranki.net/mariadb:latest
	70	+	# localhost/mariadb:latest
71	71
72	72		##
73	73		## Postgres

Jarno Rankinen ревизій цього gist 1665466218. До ревизії

1 file changed, 190 insertions

create.sh(файл створено)

		@@ -0,0 +1,190 @@
1	+	#!/bin/bash
2	+
3	+	set -e
4	+
5	+	REQUIREMENTS=( curl jq podman )
6	+	for req in ${REQUIREMENTS[@]}; do
7	+	if ! command -v $req > /dev/null; then
8	+	echo "This script requires $req to run."
9	+	exit 1
10	+	fi
11	+	done
12	+
13	+	# NEXTCLOUD_DIGEST= # NOT USED YET
14	+	# MARIADB_DIGEST= # NOT USED YET
15	+	#
16	+	# MYSQL_ROOT_PASSWD=''
17	+	# MYSQL_PASSWD='' #Used for Postgres too
18	+	#
19	+	# POSTGRES_USER=''
20	+	# POSTGRES_DB=''
21	+	#
22	+	#
23	+	# ADMIN_USER=''
24	+	# ADMIN_PASSWD=''
25	+	# NEXTCLOUD_DATA_DIR=''
26	+	# NEXTCLOUD_DB_DIR=''
27	+	# TRUSTED_DOMAINS=''
28	+	#
29	+	# CLAMAV_DB_DIR=''
30	+	# CLAMAV_CONF_DIR=''
31	+
32	+	## Place the above configurations in a file called env in the same
33	+	## directory as this script
34	+	##
35	+	## A template env file is included in the repo
36	+	[[ -f ./env ]] && . ./env \|\| exit 1
37	+
38	+	## Change this to 1 if you haven't enabled previews before
39	+	## Or this is a fresh installation
40	+	APPEND_PREVIEW_CONFIG=0
41	+
42	+	## Just in case to avoid file permission errors
43	+	#sudo chown "$USER": "$NEXTCLOUD_DB_DIR"
44	+
45	+	## Remove old log file
46	+	if [ "$UID" -ne 0 ]; then
47	+	podman unshare rm -f "$NEXTCLOUD_DATA_DIR"/data/nextcloud.log
48	+	else
49	+	rm -f "$NEXTCLOUD_DATA_DIR"/data/nextcloud.log
50	+	fi
51	+
52	+
53	+	##
54	+	## Create a pod for Nextcloud
55	+	##
56	+
57	+	podman pod create -p 8081:80 --hostname "$NEXTCLOUD_HOSTNAME" --name nextcloud
58	+
59	+	##
60	+	## Mariadb
61	+	##
62	+	#
63	+	# podman build -f ./mariadb-nextcloud.Containerfile -t oranki.net/mariadb:latest
64	+	# podman create --name nextcloud-db --pod nextcloud \
65	+	# -e MYSQL_ROOT_PASSWORD="$MYSQL_ROOT_PASSWD" \
66	+	# -e MYSQL_DATABASE='nextcloud' \
67	+	# -e MYSQL_USER='nextcloud' \
68	+	# -e MYSQL_PASSWORD="$MYSQL_PASSWD" \
69	+	# -v "$NEXTCLOUD_DB_DIR":/var/lib/mysql:Z \
70	+	# oranki.net/mariadb:latest
71	+
72	+	##
73	+	## Postgres
74	+	##
75	+	#
76	+	podman create --pod nextcloud --name nextcloud-postgres \
77	+	-e POSTGRES_USER=nextcloud \
78	+	-e POSTGRES_DB=nextcloud \
79	+	-e POSTGRES_PASSWORD="$MYSQL_PASSWD" \
80	+	-v "$NEXTCLOUD_DB_DIR":/var/lib/postgresql/data:Z \
81	+	docker.io/postgres:alpine
82	+
83	+
84	+	##
85	+	## Redis
86	+	##
87	+
88	+	podman create --name nextcloud-redis --pod nextcloud docker.io/redis:alpine
89	+
90	+	##
91	+	## ClamAV
92	+	##
93	+
94	+	## No typos in the :z and :Z flags, NC data dir needs the small z
95	+	## which means shared with another container
96	+
97	+	podman create --name nextcloud-clamav --pod nextcloud \
98	+	-v "$CLAMAV_DB_DIR":/var/lib/clamav:Z \
99	+	-v "$CLAMAV_CONF_DIR":/etc/clamav:Z \
100	+	clamav/clamav:latest
101	+
102	+	## Add the following:
103	+	## -v $NEXTCLOUD_DATA_DIR/data:/scandir:z \
104	+	## to clamav to use ClamAV's clamd scanning as well
105	+	## (not tested)
106	+
107	+
108	+	##
109	+	## Nextcloud
110	+	##
111	+
112	+	[ -n "$NEXTCLOUD_HOSTNAME" ] && sed -i "s\|^ServerName.*$\|ServerName $NEXTCLOUD_HOSTNAME\|" apache2.conf
113	+	podman build -f ./nextcloud-app.Containerfile -t nextcloud:latest
114	+	podman create --name nextcloud-app --pod nextcloud \
115	+	-e POSTGRES_DB='nextcloud' \
116	+	-e POSTGRES_USER='nextcloud' \
117	+	-e POSTGRES_PASSWORD="$MYSQL_PASSWD" \
118	+	-e POSTGRES_HOST='127.0.0.1' \
119	+	-e NEXTCLOUD_ADMIN_USER="$ADMIN_USER" \
120	+	-e NEXTCLOUD_ADMIN_PASSWORD="$ADMIN_PASSWD" \
121	+	-e NEXTCLOUD_TRUSTED_DOMAINS="$TRUSTED_DOMAINS" \
122	+	-e PHP_MEMORY_LIMIT="$NEXTCLOUD_PHP_MEMORY_LIMIT" \
123	+	-e PHP_UPLOAD_LIMIT='10G' \
124	+	-e REDIS_HOST='127.0.0.1' \
125	+	-e REDIS_PORT='6379' \
126	+	-e APACHE_DISABLE_REWRITE_IP=1 \
127	+	-e TRUSTED_PROXIES="$TRUSTED_PROXIES" \
128	+	-v "$NEXTCLOUD_DATA_DIR":/var/www/html:z \
129	+	localhost/nextcloud:latest
130	+
131	+	# -e MYSQL_DATABASE='nextcloud' \
132	+	# -e MYSQL_USER='nextcloud' \
133	+	# -e MYSQL_PASSWORD="$MYSQL_PASSWD" \
134	+	# -e MYSQL_HOST='127.0.0.1:3306' \
135	+
136	+	##
137	+	## Enable previews
138	+	##
139	+
140	+	if [[ "$APPEND_PREVIEW_CONFIG" -eq 1 ]]; then
141	+	sudo sed -i '/^);$/d' "$NEXTCLOUD_DATA_DIR"/config/config.php; cat previews.conf \| sudo tee -a "$NEXTCLOUD_DATA_DIR"/config/config.php > /dev/null
142	+	podman restart nextcloud-app
143	+	fi
144	+
145	+	##
146	+	## Generate systemd units
147	+	##
148	+
149	+	if [[ "$1" == "--generate-systemd" ]]; then
150	+
151	+	## Added UID check in case using rootful containers (under LXC guest, for example)
152	+	if [ "$UID" -ne 0 ]; then
153	+	[[ ! -d "$HOME"/.config/systemd/user ]] && mkdir -p "$HOME"/.config/systemd/user
154	+	cd "$HOME"/.config/systemd/user
155	+	if [[ "$2" == "--new" ]]; then
156	+	podman generate systemd --new -n -f nextcloud
157	+	else
158	+	podman generate systemd -n -f nextcloud
159	+	fi
160	+	systemctl --user daemon-reload
161	+
162	+	systemctl --user enable --now pod-nextcloud
163	+	else
164	+	cd /etc/systemd/system
165	+	if [[ "$2" == "--new" ]]; then
166	+	podman generate systemd --new -n -f nextcloud
167	+	else
168	+	podman generate systemd -n -f nextcloud
169	+	fi
170	+	systemctl daemon-reload
171	+
172	+	systemctl enable --now pod-nextcloud
173	+	fi
174	+
175	+	else
176	+	echo "Not generating systemd units. Use --generate-systemd flag to do so automatically."
177	+	podman pod start nextcloud
178	+	fi
179	+
180	+	echo "Waiting for nextcloud to initialize.."
181	+	while [[ "$(curl -s localhost:8081/status.php \| jq '.installed')" != "true" ]]; do
182	+	sleep 1
183	+	done
184	+
185	+	## Tag images
186	+	VERSION=$(curl -s localhost:8081/status.php \| jq -r '.versionstring')
187	+	echo "Tagging current image..."
188	+	podman tag localhost/nextcloud:latest localhost/nextcloud:"$VERSION"
189	+	echo "localhost/nextcloud version $VERSION is up!"
190	+	exit 0

Новіше Пізніше